Praxis Alba 48/32T 170mm 10/11 Spd M24 Alloy Road/Gravel Bike Crankset With PF24
Include PF24 BB. • M24 Cromo spindle | Requires Praxis M24 or ‘SRAM GXP’ BB. ALBA – M24. • 2X Rings 48/32 | Steel CR Bolts (Steel inner ring). • Approximate weight 840g +/- (172.5 with 50/34). • Q-Factor 147mm | Chainline 44.5mm for 2X | 45.5mm for DM1X.
Praxis Alba M30 Crankset 172.5mm 52/36t 110 BCD Road 10/11 Speed Black
Model: Alba M30 Crankset. Chainring is good shape! Plenty of life left here!
PRAXIS WORKS ZAYANTE M30 CRANKSET
Gently used.
Praxis Alba 48/32T 170mm M24 Alloy Road Gravel Bike Crankset Include BB
• M24 Cromo spindle | Requires Praxis M24 or ‘SRAM GXP’ BB. ALBA – M24. Include PF24 BB. • 2X Rings 48/32 | Steel CR Bolts (Steel inner ring). Shimano, SRAM and Campagnolo.
Praxis Zayante M30 52/36 X-Rings Carbon Crankset 160/104BCD Leva Time 172.5mm
Carbon Fiber Arms 172.5 mm lengthsLevatime X-Spider/Rings52/36 – 10/11 Spd – 160/104 BCDM30 Alloy Spindle | 30MM DRIVE / 28MM Non drive (Praxis BB required)8mm Alloy Main crank bolt for Install/Self-ExtractWeight : 620g +/- (172.5 with 50/34) ***Gently used crankset in like new condition. Was used for a short time before being switched out for a power meter.
Crankset Praxis Zayante carbon 170mm w/36-52t rings and T47 bottom bracket i.b.
Selling the Praxis Zayante cabon crankset, 170mm, with 36-52t rings Levatime II, so the light version of the chainrings full machined (see pictures). I’ve ridden less than 500 miles on the crank arms to try a shorter 170mm lenght, then I switched back to my previous lenght. Selling with the T47 Praxis original bottom bracket, IB standard (used on a Trek Madone), in excellent condition too. See the pictures to visually check the great status of the parts, barely showing any signs of use.
Praxis Alba Road Crank 172.5 48/32 w/ T48 Bottom Bracket
Praxis Alba Crankset 48/32 chainrings 172.5mm crank length T47 bottom bracket included
New* Praxis Works Alba X LT2 M30 Solid Forged Direct Mount Crank Arm Set 172.5
For sale is one new, open-stock*: Praxis Alba M30 LevaTime II Solid-Forged Direct-Mount Compact/Double Crank Arm Set with Chainring Bolts, 172.5mm, Matte Black; for Praxis M30 Bottom Brackets (BSA, BB86, BB30/PF30 shells; 30mm Drive/28mm NonDrive); X-Ring 4-Arm 160/104 BCD. *Condition Note: This crank arm set shows minor evidence of surface wear from open-box storage. It has never been driven. Product is functionally excellent. Stock images shown; exact appearance subject to vary. These cranks are suitable for Praxis M30 bottom brackets, which have a step-down 30mm drive/28mm non-drive bearing. They are compatible with BSA, BB86, BB30/PF30 shells, but must have the M30 bottom bracket to accommodate the 30mm/28mm spindle. The Alba are quality cranks found on many comp-level builds. Specifications 172.5mm Arm~147mm Q FactorPraxis X 4-Arm 160/104 BCDDirect mount, solid-forged alloy spider T25 Torx 3-bolt spider attachmentFor 9/16 axle pedals M30 AL Spindle – 30mm with 28mm step-downRequires Praxis M30 BB: BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive)Self-extracting bolt system8mm hex boltMade from solid-forged aluminum alloy Approximate weight: ~638 grams for 172.5 model with spider and all fasteners Notes M30 spindles taper to 28mm on the non-drive side; they are not compatible with other 30mm systems. When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you’re replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause. Includes cranks and spindle only; chainrings, chainring bolts, wave washer, etc. are not included unless otherwise mentioned in listing. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap). If not properly secured, these caps are subject to vibrating loose and becoming lost. These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service. If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap. I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Shipping: Your cranks shall be carefully packaged and shipped immediately after payment is received with insurance included free from additional charge. I ship the same day of payment (depending on when it is received). Please expect about 3-5 days for arrival. International shipping calculated by weight. Any applicable import tax and duties are not included and may be due upon receipt. That’s it! I know that the buyer shall be most pleased. Do feel free to contact me if you have any questions or concerns. Thank you so much for looking! All original content copyright November XIX MMXXIV by Blodwulf.
Praxis Works Zayante Road Crankset Road Bike Crank Arms Set Genuine Used
Crank length: 172.5mm. By using a cold-forged hollow aluminum crank and a 30mm axle, it achieves a lightweight design while maintaining strength.
Praxis Cadet – Alloy E-Bike Cranks 165mm Black
These cranks do NOT install on Bosch “Micro-ISIS” or “Square Taper” spindle motors. Left and Right arm set, cold forged aluminium. Cold Forged Aluminum options that are compatible with many e-Bike motors like Bosch, Yamaha, Brose, Fazua and even alloy versions for Specialized ISIS and.