Item Tag: M30

New* Praxis Works Turn Zayante M30 Hollow Forged Crank Arm Set 110BCD 172.5mm

For sale is one new, open-stock*: Praxis Turn Zayante M30 Hollow Forged Compact Double Crank Arm Set, 172.5mm, Matte Black; for Praxis M30 Bottom Brackets (BSA, BB86, BB30/PF30 shells; 30mm Drive/28mm NonDrive); Traditional 5-arm 110 BCD. *Note: This crank arm set does not come in retail packaging; it has faint handling wear but has never been used. Shown is a stock image. This crank arm set shows minor evidence of surface wear from open-box storage. It has never been driven (or may have brief setup and demonstration driving). Product is functionally excellent. These cranks are suitable for Praxis M30 bottom brackets, which have a step-down ‘GXP style’ 30mm drive/28mm non-drive bearing. They are compatible with BSA, BB86, BB30/PF30 shells, but must have the M30 bottom bracket to accommodate the 30mm/28mm spindle. The Zayante are quality cranks found on many comp-level builds. Specifications 172.5mm Arm~153mm Q FactorTraditional 5-Arm 110 BCDFor 9/16 axle pedals M30 AL Spindle – 30mm with 28mm step-downRequires Praxis M30 BB: BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive)Self-extracting bolt system8mm hex boltMade from Hollow Forged AluminumApproximate weight: ~712g for 172.5 model when matched with 50/34 Praxis chainrings Notes M30 spindles taper to 28mm on the non-drive side; they are not compatible with other 30mm systems. When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you’re replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause. Includes cranks and spindle only; chainrings, chainring bolts, wave washer, etc. are not included. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap). If not properly secured, these caps are subject to vibrating loose and becoming lost. These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service. If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap. I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Shipping: Your cranks shall be carefully packaged and shipped immediately after payment is received with insurance included free from additional charge. I ship the same day of payment (depending on when it is received). Please expect about 3-5 days for arrival. International shipping calculated by weight. That’s it! I know that the buyer shall be most pleased. Do feel free to contact me if you have any questions or concerns. Thank you so much for looking! All original content copyright November XI MMXVI by Blodwulf.

Blem* Oval 700 Praxis X M30 Hollow Forged Crank Arm Set 172.5 Road 160/104 BCD

For sale is one new, open-stock, blemished*: Oval 700 Praxis X-Spider M30 Hollow Forged Alloy Double Crank Arm Set, 172.5mm, Matte Black; for Praxis M30 Bottom Brackets (BSA, BB86, BB30/PF30 shells; 30mm Drive/28mm NonDrive); Proprietary 4-arm 160/104 BCD. *Condition Note: Minor blemish on non-drive arm; one inner bolt has damage to the socket rim from a wrench slip but is still functional and not easily seen on the innner side. Crank arm set otherwise has faint handling wear from storage and previous installation but has never been used. Stock image shown first and second; third image shows blemished parts. These cranks are suitable for Praxis M30 bottom brackets, which have a step-down ‘GXP style’ 30mm drive/28mm non-drive bearing. They are compatible with BSA, BB86, BB30/PF30 shells, but must have the M30 bottom bracket to accommodate the 30mm/28mm spindle. The Oval 700 are quality cranks found on many comp-level builds. Specifications 172.5mm Arm~147mm Q FactorPraxis X-Spider Non-removable spider Proprietary 4-Arm X-Spider 160/104 BCDM30 AL Spindle – 30mm with 28mm step-downRequires Praxis M30 BB: BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive)For 9/16 axle pedalsSelf-extracting bolt system8mm hex boltHollow forged aluminum arms Alloy chainring fasteners Fastener recommended torque: 10Nm Notes M30 spindles taper to 28mm on the non-drive side; they are not compatible with other 30mm systems. When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you’re replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause. Includes cranks and fasteners only; chainrings, wave washer, etc. are not included. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap). If not properly secured, these caps are subject to vibrating loose and becoming lost. These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service. If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap. I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Shipping: Your cranks shall be carefully packaged and shipped immediately after payment is received with insurance included free from additional charge. I ship the same day of payment (depending on when it is received). Please expect about 3-5 days for arrival. International shipping shall be calculated by weight. Any applicable tax and duties are not included and may be due upon receipt. That’s it! I know that the buyer shall be most pleased. Do feel free to contact me if you have any questions or concerns. Thank you so much for looking! All original content copyright February XX MMXIX by Blodwulf.

Praxis Bicycle Crankset

Praxis Bicycle Crankset . Used. Chainring has a lot of wear, I assume you would change it anyways for your build.

New* Praxis Works Alba X LT2 M30 Solid Forged Direct Mount Crank Arm Set 172.5

For sale is one new, open-stock*: Praxis Alba M30 LevaTime II Solid-Forged Direct-Mount Compact/Double Crank Arm Set with Chainring Bolts, 172.5mm, Matte Black; for Praxis M30 Bottom Brackets (BSA, BB86, BB30/PF30 shells; 30mm Drive/28mm NonDrive); X-Ring 4-Arm 160/104 BCD. *Condition Note: This crank arm set shows minor evidence of surface wear from open-box storage. It has never been driven. Product is functionally excellent. Stock images shown; exact appearance subject to vary. These cranks are suitable for Praxis M30 bottom brackets, which have a step-down 30mm drive/28mm non-drive bearing. They are compatible with BSA, BB86, BB30/PF30 shells, but must have the M30 bottom bracket to accommodate the 30mm/28mm spindle. The Alba are quality cranks found on many comp-level builds. Specifications 172.5mm Arm~147mm Q FactorPraxis X 4-Arm 160/104 BCDDirect mount, solid-forged alloy spider T25 Torx 3-bolt spider attachmentFor 9/16 axle pedals M30 AL Spindle – 30mm with 28mm step-downRequires Praxis M30 BB: BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive)Self-extracting bolt system8mm hex boltMade from solid-forged aluminum alloy Approximate weight: ~638 grams for 172.5 model with spider and all fasteners Notes M30 spindles taper to 28mm on the non-drive side; they are not compatible with other 30mm systems. When installing pedals, remember to grease, install by hand, and finish with a pedal wrench or hex key. If you’re replacing cranks with damaged pedal taps, cross-threading and insufficient tightening is the most common cause. Includes cranks and spindle only; chainrings, chainring bolts, wave washer, etc. are not included unless otherwise mentioned in listing. Self-extracting crank systems utilize a bolt and cap (as the bolt is removed, the head imparts force on the cap). If not properly secured, these caps are subject to vibrating loose and becoming lost. These caps are not essential except when removing the cranks. To avoid loss, it is advisable to apply a little threadlocker to the cap only; or, it may simply be left off and installed when needed for service. If the cap is not loose on disassembly, it is likely already locked (loose caps will tend to spin as the bolt is removed; they also will turn with thumb-pressure). Also, to function correctly, the bolt head must be greased so that it may rotate freely against the cap. I personally use a self-extracting system and simply leave off the cap; when properly greased, the cranks will come apart without it. Shipping: Your cranks shall be carefully packaged and shipped immediately after payment is received with insurance included free from additional charge. I ship the same day of payment (depending on when it is received). Please expect about 3-5 days for arrival. International shipping calculated by weight. Any applicable import tax and duties are not included and may be due upon receipt. That’s it! I know that the buyer shall be most pleased. Do feel free to contact me if you have any questions or concerns. Thank you so much for looking! All original content copyright November XIX MMXXIV by Blodwulf.