Headset Old School BMX Type-Old Schwinn10 Speeds-Threaded Chrome or Black 32.5mm
Old Style BMX Type Headset – old Schwinn 10 Speeds too Size 1″. Good for the old Schwinn Varsity 10 speeds too. Great for those reconstruction projects if you need a new headset. 27mm Crown Race – the size of the stationary race that goes on the fork.
BMX Cruiser Old School Bike Tube FORK 1″ Threaded 16″ 20″ 24″ 26″ Bicycle Wheels
26″ Fork for 26″ Wheels available in Chrome or Black Fork from AltaLine: Fork Tube is 1 ” Threaded for 1″ Threaded Headsets. The Fork Tube is approximately 9 7/8″ or 250mm long with 5 5/8″ or 150mm of threading. The axle center to bottom of the fork crown is approximately 14″ or 356mm and the axle center to the brake pivot hole is approximately 14 1/2″ or 368mm. The Fork takes a 7/8″ or 22.22mm Diameter quill stem. The Steer tube in more than enough for most all applications and will require to to cut it down for your application. Fork Requires a 27mm Crown Race.24″ Fork for 24″ Wheels available in Chrome from AltaLine: Fork Tube is 1 ” Threaded for 1″ Threaded Headsets. The Fork Tube is approximately 9 7/8″ or 250mm long with 5 5/8″ or 150mm of threading. The axle center to bottom of the fork crown is approximately 13″ or 331mm and the axle center to the brake pivot hole is approximately 13 1/2″ or 343mm. The Fork takes a 7/8″ or 22.22mm Diameter quill stem. The Steer tube in more than enough for most all applications and will require to to cut it down for your application. Fork Requires a 27mm Crown Race.20″ Fork for 20″ Wheels available in Chrome from AltaLine: Fork Tube is 1 ” Threaded for 1″ Threaded Headsets. The Fork Tube is approximately 8″ or 200mm long with 4″ or 100mm of threading. The axle center to bottom of the fork crown is approximately 10 5/8″ or 270mm and the axle center to the brake pivot hole is approximately 11 1/4″ or 284mm. The Fork takes a 13/16″ or 21.1mm Diameter quill stem, has thicker threaded fork tube wall to use with Old School BMX Stems. The Steer tube in more than enough for most all applications and will require to to cut it down for your application. Fork Requires a 27mm Crown Race.16″ Fork for 16″ Wheels available in Chrome from AltaLine: Fork Tube is 1 ” Threaded for 1″ Threaded Headsets. The Fork Tube is approximately 8″ or 200mm long with 5″ or 120mm of threading. The axle center to bottom of the fork crown is approximately 8 3/4″ or 225mm and the axle center to the brake pivot hole is approximately 9 5/8″ or 238mm. The Fork takes a 13/16″ or 21.1mm Diameter quill stem, has thicker threaded fork tube wall to use with Old School BMX Stems. The Steer tube in more than enough for most all applications and will require to to cut it down for your application. Fork Requires a 27mm Crown Race.