Item Tag: 350w, 500w, 800w

Electric Scooter LCD Meter 36V350W500W 48V800W1000W Instrument Panel Controller

1) 36V or 48V power supply 2) Meter rated working current 10mA 3) The maximum working current of the meter is 30mA 4) Shutdown leakage current <1uA 5) Supply controller terminal operating current 50mA 6) Operating temperature: -18~65°C 7) Storage temperature: -30~80°C 1*Controller 1*LCD Display Appearance and material： The outer casing of the product is ABS, and the transparent window of the liquid crystal is acrylic. Product introduction: 1) Adopt UART communication protocol. 2) Speed indication: The current driving speed is displayed in real time. 3) Battery indicator: The current battery level is displayed in real time. 4) Backlight brightness: It can be selected according to customers habits. Level 1 is the darkest and level 3 is the brightest. 5) Cycling time: real-time display of riding time. 6) Mileage indication: It can display the accumulated mileage ODO, single mileage Trip. 7) Gear mode: The gear has 1 gear, 2 gears, 3 gear mode, 1 gear is the slowest, and 3 gear is the fastest. 8) Kilometer indication: Km/h km per hour. 9) Parameter setting: Various parameters can be set through the setting interface, including gear position, wheel diameter, speed limit and so on. 10) Fault code prompt: See error code definition. LCD display instructions: 1)Speed display area: as shown from left to right, the speed is slower and faster. 2) Speed value display: display speed value, Km/h km per hour. 3) Battery display: 5 segments of power display. 4) Cycling time: Shows the riding time. 5) Gear position indication: divided into three files of 1, 2, and 3. 6) Mileage mode: divided into single mileage Trip, accumulated mileage ODO. 7) ERRO: The flag ERRO and error code are displayed when a fault is detected. 1) power switch When the instrument is off, press the switch button (3 seconds), the instrument will display and start working, and turn on the controller power; in the power-on state, press the switch button again (3 seconds), the instrument power is turned off, and the controller power is turned off. If 10 minutes (time can be set by the user) to ride and the meter is not operated, the meter will automatically turn off the power. 2) Gear key selection Short press the gear button, switch gear, the lowest 1 gear, the highest 3 gear, the default is 1 gear when the instrument is turned on. 3) Switch between TIME,TRIP,ODO,SET,ERRO In the power-on state, short press the switch button interface to switch between TIME riding time, TRIP single mileage, ODO cumulative mileage, ERRO. 1.parameter settings In the power-on state, long press the power button and the gear button, the system enters the SET mode setting, that is, the parameter setting state. In this state, the instrument parameters can be set, and the power button and the gear button can be pressed again to exit the setting state or No operation (10s) can automatically exit the setting state. In the setting interface, short press the switch button to switch the parameter setting item, short press the switch button to modify the parameter value. When in parameter item 4 (sleep time), 6 (wheel diameter), 7 (speed magnet number), 8 (speed limit), you can press and hold the switch button to switch the parameter addition and subtraction settings, short press the MODE button to add or subtract parameters. First, press and hold the MODE button to quickly add or subtract parameters; other parameter settings can only be set by short pressing MODE. 1: backlight brightness, level 1 is the darkest, level 3 is the brightest; 3: Voltage level: 36V, 48V, default 36V; 4: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit minutes; 6: wheel diameter: unit, inch; accuracy: 0.1; 7: Number of speed magnets: range: 1-100; 8: Speed limit: range 0-100km/h, not open. 9: Zero start, non-zero start setting, 0: zero start; 1: non-zero start; E: Controller current limit value setting Default 13A Range: 1-20A. F: Controller undervoltage value. H: ODO clear setting: Press and hold the MODE button for 5 seconds to clear the ODO. L: Restore factory settings: Press and hold the MODE button for 5 seconds to restore the factory settings. Error code definition: When the symbol is flashing, short press the ON/OFF key to adjust the display interface to that of the E interface. The corresponding number under the interface represents the corresponding fault content. The specific status is as follows ERRO 1: Motor failure ERRO 2: Handlebar malfunction ERRO 3: Controller failure ERRO 4: Power-off brake lever ERRO 5: Undervoltage protection ERRO 6: Communication failure, the meter cannot receive the output of the controller ERRO 7: Communication failure, the controller cannot receive the output of the instrument

Electric Scooter LCD Display Meter Controller 36V 350W500W 48V 800W1000W 6-Pin

Description : 1) 36V or 48V power supply 2) Meter rated working current 10mA 3) The maximum working current of the meter is 30mA 4) Shutdown leakage current <1uA 5) Supply controller terminal operating current 50mA 6) Operating temperature: -18~65°C 7) Storage temperature: -30~80°C PACKING LIST： 1*Controller 1*LCD Display Appearance and material： The outer casing of the product is ABS, and the transparent window of the liquid crystal is acrylic. Product introduction: 1) Adopt UART communication protocol. 2) Speed indication: The current driving speed is displayed in real time. 3) Battery indicator: The current battery level is displayed in real time. 4) Backlight brightness: It can be selected according to customers habits. Level 1 is the darkest and level 3 is the brightest. 5) Cycling time: real-time display of riding time. 6) Mileage indication: It can display the accumulated mileage ODO, single mileage Trip. 7) Gear mode: The gear has 1 gear, 2 gears, 3 gear mode, 1 gear is the slowest, and 3 gear is the fastest. 8) Kilometer indication: Km/h km per hour. 9) Parameter setting: Various parameters can be set through the setting interface, including gear position, wheel diameter, speed limit and so on. 10) Fault code prompt: See error code definition. LCD display instructions: 1)Speed display area: as shown from left to right, the speed is slower and faster. 2) Speed value display: display speed value, Km/h km per hour. 3) Battery display: 5 segments of power display. 4) Cycling time: Shows the riding time. 5) Gear position indication: divided into three files of 1, 2, and 3. 6) Mileage mode: divided into single mileage Trip, accumulated mileage ODO. 7) ERRO: The flag ERRO and error code are displayed when a fault is detected. 1) power switch When the instrument is off, press the switch button (3 seconds), the instrument will display and start working, and turn on the controller power; in the power-on state, press the switch button again (3 seconds), the instrument power is turned off, and the controller power is turned off. If 10 minutes (time can be set by the user) to ride and the meter is not operated, the meter will automatically turn off the power. 2) Gear key selection Short press the gear button, switch gear, the lowest 1 gear, the highest 3 gear, the default is 1 gear when the instrument is turned on. 3) Switch between TIME,TRIP,ODO,SET,ERRO In the power-on state, short press the switch button interface to switch between TIME riding time, TRIP single mileage, ODO cumulative mileage, ERRO. 1.parameter settings In the power-on state, long press the power button and the gear button, the system enters the SET mode setting, that is, the parameter setting state. In this state, the instrument parameters can be set, and the power button and the gear button can be pressed again to exit the setting state or No operation (10s) can automatically exit the setting state. In the setting interface, short press the switch button to switch the parameter setting item, short press the switch button to modify the parameter value. When in parameter item 4 (sleep time), 6 (wheel diameter), 7 (speed magnet number), 8 (speed limit), you can press and hold the switch button to switch the parameter addition and subtraction settings, short press the MODE button to add or subtract parameters. First, press and hold the MODE button to quickly add or subtract parameters; other parameter settings can only be set by short pressing MODE. 1: backlight brightness, level 1 is the darkest, level 3 is the brightest; 3: Voltage level: 36V, 48V, default 36V; 4: Sleep time: 0, no sleep; other numbers are sleep time, range: 1-60; unit minutes; 6: wheel diameter: unit, inch; accuracy: 0.1; 7: Number of speed magnets: range: 1-100; 8: Speed limit: range 0-100km/h, not open. 9: Zero start, non-zero start setting, 0: zero start; 1: non-zero start; E: Controller current limit value setting Default 13A Range: 1-20A. F: Controller undervoltage value. H: ODO clear setting: Press and hold the MODE button for 5 seconds to clear the ODO. L: Restore factory settings: Press and hold the MODE button for 5 seconds to restore the factory settings. Error code definition: When the symbol is flashing, short press the ON/OFF key to adjust the display interface to that of the E interface. The corresponding number under the interface represents the corresponding fault content. The specific status is as follows ERRO 1: Motor failure ERRO 2: Handlebar malfunction ERRO 3: Controller failure ERRO 4: Power-off brake lever ERRO 5: Undervoltage protection ERRO 6: Communication failure, the meter cannot receive the output of the controller ERRO 7: Communication failure, the controller cannot receive the output of the instrument